Welcome back! Today we are continuing our special! Today we will go into detail about day 2 painting kitchen cabinets!
At the end of day 1 we sprayed the primer on the units and fronts and we hung them up.
After letting the primer sit over night we can put the first coat of paint on.
We use Emerald Urethane Enamel on our cabinets. It is the hardest, most durable paint Sherwin-Williams offers, it is the same paint we use on most doors and trim as well.
We start with spraying the units and then we paint the cabinet fronts and drawer fronts.
When spraying you can’t go too fast because it will be too thin, but if you go too slow the paint will be thick and will cause runs.
After letting the first coat sit for at least 4 hours we check to make sure it is all even and there are no runs. If there are any issues you can sand it and fix it.
Make sure to do this before spraying the second coat.
The second coat needs to sit for at least 8 hours! We always let it sit over night, so this concludes day two!
Tune in next week to see how day 3 goes!