🥰CABINETS Day 1🥰

Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days post! Today we are going to walk through our process here at Exterior and Interior Painting Specialists.

Our kitchen cabinet process used to take 6 days, but since we work in an assembly line process, use an airless sprayer and create an onsite spray booth we are able to cut it down to a 3-day process.  Check out our table of contents below to see everything we do when we begin a cabinet project!  Check back next week to see what we do on day two! 

Table of contents:

  • Arrival
  • Protecting your floors
  • Removing hardware
  • Cleaning
  • Taping
  • Sanding
  • HEPA filter system
  • Wash again
  • Spray booths
  • Primer
  • Conclusion

Arrival

When we start a new cabinet project we arrive at 8 AM. We typically start on a Monday or on Thursday, we start on these days because our process takes 3 days. We can finish two cabinet projects in a week. We always try to park on the road and not in the customers drive-way. We do this just incase anything were to spill or leak, we wouldn’t want to damage a drive-way. Once we get there and great the customer and walk through the project for a final time,  we lay drop cloths to protect your floors.

Protecting your floors:

We lay cloth drop cloths everywhere we walk and where we will be spraying we use paper drop cloths purchased from Sherwin-Williams. We tape the edges of the paper down so they don’t move and the paper doesn’t allow liquid to leak through.

Removing Hardware:

Next, we begin taking the drawer fronts and the door fronts off the units. These will not leave the job site at all, we will go over the on site spray booth soon.  After we take everything down we also remove all the hardware, this includes the handles, hinges, and anything else on the cabinets. This is a great opportunity for the clients to change out and update! We have to take them off no matter what to paint them! If they are there and setting to the side, we will take care of this for you. 

Thinking of having your cabinets painted? Click here for color and design ideas! 

Cleaning:

After taking everything off the cabinet fronts we clean everything with TSP. We use TSP (Trisodium Phosphate) to break down the grease, grime, and all other things off the surface. It is a safe chemical that easily breaks down dirt and other unwanted things in the kitchen. We need to clean the units on the wall as well as the front and back of the doors and drawers. 

Taping:

To be able to spray the units we will tape off the inside so there is no over spray. We do this in the drawer and door fronts as shown in the video below. We place the tape inside the unit and drag the plastic down to cover the inside. We drape plastic over all the appliances, so nothing is damaged with over spray.

Sanding:

Now, before we go onto a light sanding we are going to set up our HEPA filter sanding system! This is an attachment to the sander that sucks up and collects all the extra dust that comes off as we sand. Sanding takes off any other layers of paint on the cabinets and makes it easier for the primer and new paint to adhere to the cabinets. We have to make sure to sand every little corner on all surfaces that are being painted. 

Click here to see what Sherwin-Williams products we use! 

HEPA Filter System:

This filter system collects very small microns of dust while we are sanding!  After we sand we are goingk to wash it again with TSP to get any other dust off and make sure we got all of the grime off.

We are going to go on and set up a spray booth! Building a spray booth in the garage, spare room, or basement allows us to spray the fronts with the airless sprayer and keeping it on site.

Spray Booths:

We make two different spray booths at the home. We hang plastic from the ceiling around the cabinets. This will protect the rest of the home from any over spray that may happen. We also make a spray booth in the garage, basement, or a spare room. In this area we lay the paper drop cloth that we mentioned in the kitchen. We also hang the plastic from the ceiling the same way we did in the kitchen. This is where we will spray the door and drawer fronts and let them dry.

Click here to read our ultimate cabinet guide! 

Primer:

Now that we have the spray booths and everything set up and prepped, we are going to prime everything. 

Once the priming is finished we clean the areas and wrap up for the day.

Conclusion:

Thank you for reading our blog this week! Today we went over everything we do on the first day! Make sure to check back next week to see what we do on the second day! We use all Sherwin-Williams products, Offer a 5-Year guarantee, and FREE ESTIMATES with a co-owner! Call or text today! 309-349-7021 or fill out a form below! 

CALL NOW FREE QUOTES:  309-349-7021

FOR A FREE ESTIMATE, or if you have ANY other questions, KINDLY FILL IN THE FORM BELOW:

🎨Cabinet Painting🎨

Click here to Schedule Appointment and SAVE $200.00 Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days

Read More »

🎨Interior Uncovered🎨

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

😎Color & Product Help😎

Introduction: Welcome to Exterior & Interior Painting Specialists blog! Today we are going to share tips from professional interior designers on picking out new colors

Read More »

😍Interior Guide😍

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

😎Interior Painting😎

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

🥰CABINETS Day 1🥰

Click here to Schedule Appointment and SAVE $200.00 Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days

Read More »

🎨Kitchen Design & Color Help🎨

Introduction:

Hello, welcome to Exterior and Interior Painting Specialists blog! Today we are going to go over some simple tips and tricks to help you spruce up your home on a budget! We are going to help you pick out colors and finishes, as well as sharing our entire cabinet painting process! If you are doing the cabinets yourself and don’t have an airless sprayer to use, you can still use our entire process by brushing or rolling! Check out our table of contents below to see everything we go over! Call or text us at 309-349-7021 for a free estimate!

Click here to see our detailed 3 day cabinet painting process!

Table of contents:

  • Color snap from Sherwin-Williams
  • Ways to choose colors
  • “The Eye” from Sherwin-Williams
  • Kitchen styles
  • Different finishes/sheens
  • Best finish for where
  • Projects
  • What we use
  • Low Budget tips
  • Conclusion

Sherwin-Williams has an app that you can download!

Use ColorSnap® Visualizer for WebMobile, or iPad to capture colors from your surrounding and match them to Sherwin-Williams paint colors. Explore over 1,500 colors to get inspiration from a photo.  Virtually paint your rooms with ColorSnap® Visualizer for Web and iPad.

The app allows you to browse their color selection and save your favorites! To make it even better, you can take a picture of whatever you’re painting (Cabinets, Walls, Furniture, etc.) and drag the color you want to see up there to picture it before actually dedicating to the color!

Keep this app in mind as you read through our helpful tips!

Ways to choose colors:

1) Choose a Color Scheme From the Largest Pattern in the Space:

Look around the room you are painting- if there are any large patterns, colorful rugs or large pieces of art; choose the color that stands out the most that you like.
For a neutral wall paint color, look to the pattern’s whites and beiges. You can choose any color you like out of this. Of course if you are starting fresh you can choose whatever color and then buy your furniture to match the color you chose.

2) Start With the Formal Areas of the House:

Specifically, the living room, dining room, and entryway.
Choose a color scheme for those areas first, then pull one color from the scheme for the kitchen.
For example, take the red sofa and tone it down (say, to burgundy) for an accent in more private spaces such as the den, office or bedroom.

3) Use the Color Wheel:

In general colors next to each other on the color wheel, such as blue and green — are more casual and relaxing, and work best in informal or private spaces. This is a good strategy for a bedroom, where you want to rest and recover.

4) Back to Black:

For a small pop, try a black lampshade or a black vase; for bigger impact, paint your kitchen’s base cabinets in the high-drama hue. This will stand out from everything else, but in a classic way.

5) Go With Grays:

Put today’s trendiest and neutral gray to work in any style interior. Gray’s chameleon-like quality allows the color to appear there truest. Grey is extremely popular right now! Any and all shades you can think of!

6) Use the Rule of 60-30-10:

“When decorating a space, divide the colors into components of 60 percent of a dominant color (walls), 30 percent of a secondary color (upholstery) and 10 percent of an accent color (accessories)

7) Make Small Spaces Pop:

If you have a small room in your house, don’t paint it white to make it seem bigger. Instead, give it more oomph with a look-at-me color choice. Let your big rooms expand with light, and your small rooms envelop you.

8) Contrast Warm and Cool:

With a healthy balance of 80-20% you can accent a room giving it life without over stimulating. Now this isn’t necessarily 80 % warm and 20 % cool or vise versa, however, it is either or. Make sure to not have too much of both, it will make the room over whelming and feel crowded. 
 

9) Rock a Monochromatic Look

Shine the spotlight on your favorite color by filling a small space, like a bathroom, with just that hue.

10) Follow the Rule of Three:

Limiting your palette to just three colors is a can’t-miss strategy in any space. Following this rule will ensure you don’t have too much going on in one room.
 

11) Elegant look:

Neutral colors offer elegance and flexibility within a room. Neutral colors are no longer simply white or beige. You can turn a simple living room into one of elegance by selecting varying shades of neutral colors such as almond walls with red toned browns on the trim. You can also add splashes of color throughout the room with a color throw, pillow or vase carefully placed to offset the subtle neutral tones in the room.

12)  Vibrant look:

If you want a room with pizzazz, choose vibrant colors and their respective shades such as oranges and gold, reds and dark purples. You can complement these colors by selecting a two next to each other such as gold and orange and one from the opposite side of the color wheel such as purple. You can also select black and red for a real stand out contrast and look that is reminiscent of an Oriental look. Choose two colors next to each other on the color wheel for a visual contrast as one will stand out from the other.
You can lower a high ceiling visually by painting it a darker shade than the walls. By the same token, you can expand a room by selecting a lighter color for your ceiling than the walls. Don’t be afraid to add a tint of color to your ceiling paint for a tied in and subtle look. One way to go if you are afraid of too much color in your ceiling is to paint the ceiling, door trim and floor moldings the same shade such as a creamy ivory. This will add a touch of elegance and a nice transition throughout your room.

Bonus Tips:

If you go somewhere and like a color you see, or you like a color already in your home, they make a tool that can scan the wall and pop up different options! This is called “The Eye” and you can purchase it at your local Sherwin-Williams! You download an app on your phone called “Muse” it will save your previous scans and shows you the closest color from any maker.

  1. The first look is just a typical repaint. Updating your kitchen with a fresh coat of paint can take your kitchen cave and turn it into an elegant hangout. Currently one of the most popular colors is a shade of grey. You can refresh with the same color you had before or make it any color you would like!

2. Another way to give your kitchen its own personality is by having one of the detached sections an accent color while keeping the rest of the cabinets the same. It’s a way of having an accent without drawing too much attention away.

3. Another new up and coming look is accenting the island. Something about the center of the room being a darker color than the rest brings it all together. It gives the heart of the home its own heart.

4. Having the top a lighter color and the bottom a darker color. This nice accent separates the room in a nice clean line. It brings a sophisticated feel to the room. If you are feeling really rebellious, you can have the top cabinets the darker color.

Different finishes(Sheen): 

  • High Gloss: Most durable and reflects the most light. Will show any/all imperfections.
  • Semi-Gloss: Easy to wipe off and clean. Shiny but not as shiny as high-gloss. Will show major imperfections but not all.
  • Satin: Easy to clean doesn’t reflect a lot of light but doesn’t absorb the light.
  • Eggshell: Soft, velvety look. Resists stains but you may need to scrub a little. There is no shine to this finish.
  • Flat/Matte: There is no shine to this finish and it absorbs the light. Best for hiding imperfections in walls but is hard to clean, it may need painted over if it gets dirty enough.

What finish is best for where:

  • High Gloss: Best for high traffic areas (Cabinets, Trim, Doors) Not good for most walls.
  • Semi-gloss: Good for wet rooms (Kitchen, bathroom)
  • Satin: Good for family rooms, foyers, halls and children’s rooms.
  • Eggshell: Great for the dining room and living room.
  • Flat/Matte: Good for adults rooms and ceilings. Not recommended for children’s rooms or high traffic areas.

Before

Springfield

Morton

After

Springfield

Morton

What we use:

Our cabinet painting process used to take us six days to complete one project, but after practicing over the last four years and working with Sherwin-Williams representatives, we were able to cut that time in half per project. You can click here to read all about our cabinet painting process here at Exterior and Interior Painting Specialists. The process is the same for all cabinets, whether they are in a garage, bathroom, kitchen or even laundry room. We use the same product on all cabinets, trim & doors. 

Emerald Urethane Enamel:

Product Information: 

  • A smooth and luxurious finish for doors and trim. Delivers a finish that withstands wear and tear and goes on in fewer coats.
  • Durable finish is great for windows, doors and trim.
  • Perfect for areas that are cleaned frequently.
  • Interior/exterior waterbased urethane modified alkyd with the look and feel of an alkyd/oil finish.
  • Available in a range of Sherwin-Williams colors and custom tints in satin, semi-gloss and gloss sheens. Resists yellowing compared to traditional oil based paints and has excellent blocking resistance, allowing surfaces to maintain a tough, durable finish.

We use Emerald Urethane Enamel for many projects, as mentioned above. We use it for these things because it is so durable and lasts a long time. It’s great for areas that are touched a lot. 

Low-budget kitchen tips:

Swap Out the Faucet

A new fixture can add that extra shine you’re looking for. New faucets have a lot more functionality, so the upgrade can be more than just aesthetic. This is a good first-time DIY plumbing project to try. Just make sure you shut off the water valves and follow the directions carefully.

Tin-Tile Backsplash

This is an easy project that should cost you no more than $100. Tin tile has many advantages: Its reflective properties will brighten a room, it is easy to clean and it comes in a variety of finishes to match your kitchen’s hardware and fixtures.

Try a Peel-and-Stick Backsplash Kit

An all-in-one mosaic tile kit is a snap to install and comes with everything you need, including the tools. The tile is peel-and-stick and the grout is pre-mixed so you save time, mess and money.

Hang ’em High

Pots and pans take up a lot of cabinet space. Hanging cookware on a rack suspended from the ceiling will free up a cabinet or two, and it will add more style to your kitchen.

Conclusion:

Thank you for reading Exterior and Interior Painting Specialists blog! Today we went over some simple tips and tricks to help you spruce up your home on a budget! We  helped you pick out colors and finishes, as well as sharing our entire cabinet painting process! If you are doing the cabinets yourself and don’t have an airless sprayer to use, you can still use our entire process by brushing or rolling! Check out our table of contents below to see everything we go over! Call or text us at 309-349-7021 for a free estimate!

CALL NOW FREE QUOTES:  309-349-7021 FOR A FREE ESTIMATE, or if you have ANY other questions, KINDLY FILL IN THE FORM BELOW:

🎨Cabinet Painting🎨

Click here to Schedule Appointment and SAVE $200.00 Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days

Read More »

🎨Interior Uncovered🎨

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

😎Color & Product Help😎

Introduction: Welcome to Exterior & Interior Painting Specialists blog! Today we are going to share tips from professional interior designers on picking out new colors

Read More »

😍Interior Guide😍

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

😎Interior Painting😎

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

🥰CABINETS Day 1🥰

Click here to Schedule Appointment and SAVE $200.00 Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days

Read More »

🤩Our whole cabinet process🤩

Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days post! Today we are going to walk through our process here at Exterior and Interior Painting Specialists.

Our kitchen cabinet process used to take 6 days, but since we work in an assembly line process, use an airless sprayer and create an onsite spray booth we are able to cut it down to a 3-day process.  Check out our table of contents below to see everything we do when we begin a cabinet project!  Check back next week to see what we do on day two! 

Table of contents:

  • Arrival
  • Protecting your floors
  • Removing hardware
  • Cleaning
  • Taping
  • Sanding
  • HEPA filter system
  • Wash again
  • Spray booths
  • Primer
  • End of Day 1
  • Coat 1 
  • 4 hour break
  • Checking all areas
  • Coat 2
  • End of day 2
  • Checking the areas
  • Cleaning the tape/plastic
  • Replacing hardware
  • Re-assembling
  • Drop cloth clean-up
  • Cleaning

Arrival

When we start a new cabinet project we arrive at 8 AM. We typically start on a Monday or on Thursday, we start on these days because our process takes 3 days. We can finish two cabinet projects in a week. We always try to park on the road and not in the customers drive-way. We do this just incase anything were to spill or leak, we wouldn’t want to damage a drive-way. Once we get there and great the customer and walk through the project for a final time,  we lay drop cloths to protect your floors.

Protecting your floors:

We lay cloth drop cloths everywhere we walk and where we will be spraying we use paper drop cloths purchased from Sherwin-Williams. We tape the edges of the paper down so they don’t move and the paper doesn’t allow liquid to leak through.

Removing Hardware:

Next, we begin taking the drawer fronts and the door fronts off the units. These will not leave the job site at all, we will go over the on site spray booth soon.  After we take everything down we also remove all the hardware, this includes the handles, hinges, and anything else on the cabinets. This is a great opportunity for the clients to change out and update! We have to take them off no matter what to paint them! If they are there and setting to the side, we will take care of this for you. 

Cleaning:

After taking everything off the cabinet fronts we clean everything with TSP. We use TSP (Trisodium Phosphate) to break down the grease, grime, and all other things off the surface. It is a safe chemical that easily breaks down dirt and other unwanted things in the kitchen. We need to clean the units on the wall as well as the front and back of the doors and drawers. 

Taping:

To be able to spray the units we will tape off the inside so there is no over spray. We do this in the drawer and door fronts as shown in the video below. We place the tape inside the unit and drag the plastic down to cover the inside. We drape plastic over all the appliances, so nothing is damaged with over spray.

Sanding:

Now, before we go onto a light sanding we are going to set up our HEPA filter sanding system! This is an attachment to the sander that sucks up and collects all the extra dust that comes off as we sand. Sanding takes off any other layers of paint on the cabinets and makes it easier for the primer and new paint to adhere to the cabinets. We have to make sure to sand every little corner on all surfaces that are being painted. 

HEPA Filter System:

This filter system collects very small microns of dust while we are sanding!  After we sand we are goingk to wash it again with TSP to get any other dust off and make sure we got all of the grime off.

We are going to go on and set up a spray booth! Building a spray booth in the garage, spare room, or basement allows us to spray the fronts with the airless sprayer and keeping it on site.

Spray Booths:

We make two different spray booths at the home. We hang plastic from the ceiling around the cabinets. This will protect the rest of the home from any over spray that may happen. We also make a spray booth in the garage, basement, or a spare room. In this area we lay the paper drop cloth that we mentioned in the kitchen. We also hang the plastic from the ceiling the same way we did in the kitchen. This is where we will spray the door and drawer fronts and let them dry.

Primer:

Now that we have the spray booths and everything set up and prepped, we are going to prime everything. 

Once the priming is finished we clean the areas and wrap up for the day.

At the end of day 1 we sprayed the primer on the units and fronts and we hung them up. 

Day 2 table of contents:

  • Coat 1 
  • 4 hour break
  • Checking all areas
  • Coat 2

After letting the primer sit over night we can put the first coat of paint on.

We use Emerald Urethane Enamel from Sherwin-Williams on all of our cabinet projects. It is the hardest, most durable paint Sherwin-Williams offers, it is also the same paint we use on most doors and trim as well.

Click here to read the ultimate cabinet guide!

We start with spraying the units and then we paint the cabinet fronts and drawer fronts. 

When spraying you can’t go too fast because it will be too thin, but if you go too slow the paint will be thick and will cause runs.

After letting the first coat sit for at least 4 hours we check to make sure it is all even and there are no runs. If there are any issues you can sand it and fix it. 

Make sure to do this before spraying the second coat, check every area on the units, and all door and drawer fronts.

The second coat needs to sit for at least 8 hours! We always let it sit over night, so this concludes day two! 

Tune in next week to see how day 3 goes!

Pictures of jobs we’ve completed:

Table of contents:

  • Checking the areas
  • Cleaning the tape/plastic
  • Replacing hardware
  • Re-assembling
  • Drop cloth clean-up
  • Cleaning

Now if you remember from last week, we ended the day of day two by spraying on the second coat.

The first thing we do today is, we are going to look over everything we painted and make sure there are no dings from the doors accidentally touching each other and make sure there are no runs.

Once we make sure all of the door fronts, drawer fronts, and units are okay we are going to start cleaning up!

Cleaning up means we are going to remove the tape and plastic that you see pictured below. We can also remove any plastic we had hanging from the ceiling or on any furniture such as the separate china cabinet pictured in the background below. We are going to leave all of the drop clothes on the ground for now. Someone else is also going to start taking apart the spray booth in the garage and bringing the cabinet fronts and drawers fronts into the kitchen.

Click here to see what Sherwin-Williams products we use.

Now we are going to put the handles back on the doors and drawers. Sometimes the clients take this opportunity to change out their hardware. If they purchase it ahead of time and let us know we typically change them out at no charge. Sometimes they change the number of holes when changing handles, that is when the charge plays in.

We will also attach the hinges back onto the cabinet doors. These can also been changes out, it is best to take an existing hinge you use to the store with you before purchasing them to make sure it works in your kitchen.  We attach the hinge to the door then to the units. 

When we took the doors and drawer fronts off we labeled them and the units. We need to play close attention to this when we are putting them back on. House tend to settle over time, and that means sometimes they shift. The cabinets are accustomed to this so if we mix any of them up it will stick out like a sore thumb.

Click here to read the ultimate cabinet guide! 

After we get everything put back together, we finish cleaning.

We have to take the remaining tape, plastic, and drop cloths. The drop cloths will be the last thing to go, when all of our tools except for cleaning tools are out of the home. After taking the drop clothes out we walk through and clean any possible messes.

Conclusion:

Thank you for reading our blog! Today we shared our entire 3 day process for completing cabinets!  Give us a call at 309-349-7021 to get a free estimate! Check out our other blogs and Facebook to see any awesome new deals! 

CALL NOW FREE QUOTES:  309-349-7021 FOR A FREE ESTIMATE, or if you have ANY other questions, KINDLY FILL IN THE FORM BELOW:

🎨Cabinet Painting🎨

Click here to Schedule Appointment and SAVE $200.00 Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days

Read More »

🎨Interior Uncovered🎨

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

😎Color & Product Help😎

Introduction: Welcome to Exterior & Interior Painting Specialists blog! Today we are going to share tips from professional interior designers on picking out new colors

Read More »

😍Interior Guide😍

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

😎Interior Painting😎

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

🥰CABINETS Day 1🥰

Click here to Schedule Appointment and SAVE $200.00 Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days

Read More »

🤯DAY 3 FINAL day on Cabinets!🤯

Click here for color help!

Welcome to Exterior and Interior Painting Specialists Blog! Today is the third and final blog in our kitchen cabinet painting process! 

Click here to read about day one!

Click here to read about day two!

Table of contents:

  • Checking the areas
  • Cleaning the tape/plastic
  • Replacing hardware
  • Re-assembling
  • Drop cloth clean-up
  • Cleaning
  • Conclusion

Now if you remember from last week, we ended the day of day two by spraying on the second coat.

The first thing we do today is, we are going to look over everything we painted and make sure there are no dings from the doors accidentally touching each other and make sure there are no runs.

Once we make sure all of the door fronts, drawer fronts, and units are okay we are going to start cleaning up!

Cleaning up means we are going to remove the tape and plastic that you see pictured below. We can also remove any plastic we had hanging from the ceiling or on any furniture such as the separate china cabinet pictured in the background below. We are going to leave all of the drop clothes on the ground for now. Someone else is also going to start taking apart the spray booth in the garage and bringing the cabinet fronts and drawers fronts into the kitchen.

Click here to see what Sherwin-Williams products we use.

Now we are going to put the handles back on the doors and drawers. Sometimes the clients take this opportunity to change out their hardware. If they purchase it ahead of time and let us know we typically change them out at no charge. Sometimes they change the number of holes when changing handles, that is when the charge plays in.

We will also attach the hinges back onto the cabinet doors. These can also been changes out, it is best to take an existing hinge you use to the store with you before purchasing them to make sure it works in your kitchen.  We attach the hinge to the door then to the units. 

When we took the doors and drawer fronts off we labeled them and the units. We need to play close attention to this when we are putting them back on. House tend to settle over time, and that means sometimes they shift. The cabinets are accustomed to this so if we mix any of them up it will stick out like a sore thumb.

Click here to read the ultimate cabinet guide! 

After we get everything put back together, we finish cleaning.

We have to take the remaining tape, plastic, and drop cloths. The drop cloths will be the last thing to go, when all of our tools except for cleaning tools are out of the home. After taking the drop clothes out we walk through and clean any possible messes.

Conclusion:

Thank you for reading our blog! Today we shared what we do on our third and final day on kitchen cabinets! Give us a call at 309-349-7021 to get a free estimate! Check out our other blogs and Facebook to see any awesome new deals! 

CALL NOW FREE QUOTES:  309-349-7021 FOR A FREE ESTIMATE, or if you have ANY other questions, KINDLY FILL IN THE FORM BELOW:

🎨Cabinet Painting🎨

Click here to Schedule Appointment and SAVE $200.00 Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days

Read More »

🎨Interior Uncovered🎨

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

😎Color & Product Help😎

Introduction: Welcome to Exterior & Interior Painting Specialists blog! Today we are going to share tips from professional interior designers on picking out new colors

Read More »

😍Interior Guide😍

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

😎Interior Painting😎

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

🥰CABINETS Day 1🥰

Click here to Schedule Appointment and SAVE $200.00 Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days

Read More »

🤯Day 2 on cabinets!🤯

Welcome back to Exterior and Interior Painting Specialists Blog! Today we are continuing our special! We will go into detail about day 2 painting kitchen cabinets! You can click on the words below to go directly to our blog about day 1!

At the end of day 1 we sprayed the primer on the units and fronts and we hung them up. 

Day 2 table of contents:

  • Coat 1 
  • 4 hour break
  • Checking all areas
  • Coat 2
  • Conclusion

After letting the primer sit over night we can put the first coat of paint on.

We use Emerald Urethane Enamel from Sherwin-Williams on all of our cabinet projects. It is the hardest, most durable paint Sherwin-Williams offers, it is also the same paint we use on most doors and trim as well.

Click here to read the ultimate cabinet guide!

We start with spraying the units and then we paint the cabinet fronts and drawer fronts. 

When spraying you can’t go too fast because it will be too thin, but if you go too slow the paint will be thick and will cause runs.

After letting the first coat sit for at least 4 hours we check to make sure it is all even and there are no runs. If there are any issues you can sand it and fix it. 

Make sure to do this before spraying the second coat, check every area on the units, and all door and drawer fronts.

The second coat needs to sit for at least 8 hours! We always let it sit over night, so this concludes day two! 

Tune in next week to see how day 3 goes!

Conclusion:

In today’s blog we went over what we do on the second day on cabinet projects! Make sure to check back in next week to see what we do on the third and final day!

Pictures of jobs we’ve completed:

CALL NOW FREE QUOTES:  309-349-7021

FOR A FREE ESTIMATE, or if you have ANY other questions, KINDLY FILL IN THE FORM BELOW:

🤩First Day working on cabinets!🤩

Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days post! Today we are going to walk through our process here at Exterior and Interior Painting Specialists.

Our kitchen cabinet process used to take 6 days, but since we work in an assembly line process, use an airless sprayer and create an onsite spray booth we are able to cut it down to a 3-day process.  Check out our table of contents below to see everything we do when we begin a cabinet project!  Check back next week to see what we do on day two! 

Table of contents:

  • Arrival
  • Protecting your floors
  • Removing hardware
  • Cleaning
  • Taping
  • Sanding
  • HEPA filter system
  • Wash again
  • Spray booths
  • Primer
  • Conclusion

Arrival

When we start a new cabinet project we arrive at 8 AM. We typically start on a Monday or on Thursday, we start on these days because our process takes 3 days. We can finish two cabinet projects in a week. We always try to park on the road and not in the customers drive-way. We do this just incase anything were to spill or leak, we wouldn’t want to damage a drive-way. Once we get there and great the customer and walk through the project for a final time,  we lay drop cloths to protect your floors.

Protecting your floors:

We lay cloth drop cloths everywhere we walk and where we will be spraying we use paper drop cloths purchased from Sherwin-Williams. We tape the edges of the paper down so they don’t move and the paper doesn’t allow liquid to leak through.

Removing Hardware:

Next, we begin taking the drawer fronts and the door fronts off the units. These will not leave the job site at all, we will go over the on site spray booth soon.  After we take everything down we also remove all the hardware, this includes the handles, hinges, and anything else on the cabinets. This is a great opportunity for the clients to change out and update! We have to take them off no matter what to paint them! If they are there and setting to the side, we will take care of this for you. 

Cleaning:

After taking everything off the cabinet fronts we clean everything with TSP. We use TSP (Trisodium Phosphate) to break down the grease, grime, and all other things off the surface. It is a safe chemical that easily breaks down dirt and other unwanted things in the kitchen. We need to clean the units on the wall as well as the front and back of the doors and drawers. 

Taping:

To be able to spray the units we will tape off the inside so there is no over spray. We do this in the drawer and door fronts as shown in the video below. We place the tape inside the unit and drag the plastic down to cover the inside. We drape plastic over all the appliances, so nothing is damaged with over spray.

Sanding:

Now, before we go onto a light sanding we are going to set up our HEPA filter sanding system! This is an attachment to the sander that sucks up and collects all the extra dust that comes off as we sand. Sanding takes off any other layers of paint on the cabinets and makes it easier for the primer and new paint to adhere to the cabinets. We have to make sure to sand every little corner on all surfaces that are being painted. 

HEPA Filter System:

This filter system collects very small microns of dust while we are sanding!  After we sand we are goingk to wash it again with TSP to get any other dust off and make sure we got all of the grime off.

We are going to go on and set up a spray booth! Building a spray booth in the garage, spare room, or basement allows us to spray the fronts with the airless sprayer and keeping it on site.

Spray Booths:

We make two different spray booths at the home. We hang plastic from the ceiling around the cabinets. This will protect the rest of the home from any over spray that may happen. We also make a spray booth in the garage, basement, or a spare room. In this area we lay the paper drop cloth that we mentioned in the kitchen. We also hang the plastic from the ceiling the same way we did in the kitchen. This is where we will spray the door and drawer fronts and let them dry.

Primer:

Now that we have the spray booths and everything set up and prepped, we are going to prime everything. 

Once the priming is finished we clean the areas and wrap up for the day.

Conclusion:

Thank you for reading our blog this week! Today we went over everything we do on the first day! Make sure to check back next week to see what we do on the second day!

CALL NOW FREE QUOTES:  309-349-7021

FOR A FREE ESTIMATE, or if you have ANY other questions, KINDLY FILL IN THE FORM BELOW:

🎨Cabinet Painting🎨

Click here to Schedule Appointment and SAVE $200.00 Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days

Read More »

🎨Interior Uncovered🎨

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

😎Color & Product Help😎

Introduction: Welcome to Exterior & Interior Painting Specialists blog! Today we are going to share tips from professional interior designers on picking out new colors

Read More »

😍Interior Guide😍

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

😎Interior Painting😎

Introduction: Welcome to Exterior and Interior Painting Specialists blog!Today we are going to give you all of our interior tips when painting your home! Check out the

Read More »

🥰CABINETS Day 1🥰

Click here to Schedule Appointment and SAVE $200.00 Hi everyone! Today is the start of our How to paint kitchen cabinets in 3 short days

Read More »

🤩The Ultimate cabinet guide!🤩

Introduction:

Hello, welcome to Exterior and Interior Painting Specialists blog! Today we are going to go over some simple tips and tricks to help you spruce up your home on a budget! We are going to help you pick out colors and finishes, as well as sharing our entire cabinet painting process! If you are doing the cabinets yourself and don’t have an airless sprayer to use, you can still use our entire process by brushing or rolling! Check out our table of contents below to see everything we go over! Call or text us at 309-349-7021 for a free estimate!

Table of contents:

  • Helping choosing colors and finishes
  • Different kitchen styles
  • Our cabinet painting process
  • What we use
  • Low-budget kitchen tips!
  • Conclusion

Sherwin-Williams has an app that you can download!

Use ColorSnap® Visualizer for WebMobile, or iPad to capture colors from your surrounding and match them to Sherwin-Williams paint colors. Explore over 1,500 colors to get inspiration from a photo.  Virtually paint your rooms with ColorSnap® Visualizer for Web and iPad.

The app allows you to browse their color selection and save your favorites! To make it even better, you can take a picture of whatever you’re painting (Cabinets, Walls, Furniture, etc.) and drag the color you want to see up there to picture it before actually dedicating to the color!

Keep this app in mind as you read through our helpful tips!

15 Helpful tips:

1) Choose a Color Scheme From the Largest Pattern in the Space:

Look around the room you are painting- if there are any large patterns, colorful rugs or large pieces of art; choose the color that stands out the most that you like.
For a neutral wall paint color, look to the pattern’s whites and beiges. You can choose any color you like out of this. Of course if you are starting fresh you can choose whatever color and then buy your furniture to match the color you chose.

2) Decorate From Dark to Light, Vertically

Use darker colors for the floor, medium colors for the walls and light for the ceiling. This will help keep the room looking nice and aligned.

3) Start With the Formal Areas of the House:

Specifically, the living room, dining room, and entryway.
Choose a color scheme for those areas first, then pull one color from the scheme.
For example, take the red sofa and tone it down (say, to burgundy) for an accent in more private spaces such as the den, office or bedroom.

4) Use the Color Wheel:

In general colors next to each other on the color wheel, such as blue and green — are more casual and relaxing, and work best in informal or private spaces. This is a good strategy for a bedroom, where you want to rest and recover.

5) Use Your Clothes:

Most people buy clothes in colors they like to wear and they look good in. Similarly, you should dress your rooms in colors that flatter you. If denim is your go-to, consider a navy sofa or if you look (and feel) perkiest in bright yellows, try mixing in a few citrusy accents with pillows or accessories throughtout the room.

6) Back to Black:

For a small pop, try a black lampshade or a black vase; for bigger impact, paint your kitchen’s base cabinets in the high-drama hue. This will stand out from everything else, but in a classic way.

7) Go With Grays:

Put today’s trendiest and neutral gray to work in any style interior. Gray’s chameleon-like quality allows the color to appear there truest. Grey is extremely popular right now! Any and all shades you can think of!

8) Use the Rule of 60-30-10:

“When decorating a space, divide the colors into components of 60 percent of a dominant color (walls), 30 percent of a secondary color (upholstery) and 10 percent of an accent color (accessories)

9) Make Small Spaces Pop:

If you have a small room in your house, don’t paint it white to make it seem bigger. Instead, give it more oomph with a look-at-me color choice. Let your big rooms expand with light, and your small rooms envelop you.

10) Contrast Warm and Cool:

With a healthy balance of 80-20% you can accent a room giving it life without over stimulating. Now this isn’t necessarily 80 % warm and 20 % cool or vise versa, however, it is either or. Make sure to not have too much of both, it will make the room over whelming and feel crowded. 
 

11) Rock a Monochromatic Look

Shine the spotlight on your favorite color by filling a small space, like a bathroom, with just that hue.

12) Follow the Rule of Three:

Limiting your palette to just three colors is a can’t-miss strategy in any space. Following this rule will ensure you don’t have too much going on in one room.
 

13) Elegant look:

Neutral colors offer elegance and flexibility within a room. Neutral colors are no longer simply white or beige. You can turn a simple living room into one of elegance by selecting varying shades of neutral colors such as almond walls with red toned browns on the trim. You can also add splashes of color throughout the room with a color throw, pillow or vase carefully placed to offset the subtle neutral tones in the room.

14)  Vibrant look:

If you want a room with pizzazz, choose vibrant colors and their respective shades such as oranges and gold, reds and dark purples. You can complement these colors by selecting a two next to each other such as gold and orange and one from the opposite side of the color wheel such as purple. You can also select black and red for a real stand out contrast and look that is reminiscent of an Oriental look. Choose two colors next to each other on the color wheel for a visual contrast as one will stand out from the other.
You can lower a high ceiling visually by painting it a darker shade than the walls. By the same token, you can expand a room by selecting a lighter color for your ceiling than the walls. Don’t be afraid to add a tint of color to your ceiling paint for a tied in and subtle look. One way to go if you are afraid of too much color in your ceiling is to paint the ceiling, door trim and floor moldings the same shade such as a creamy ivory. This will add a touch of elegance and a nice transition throughout your room.

Bonus Tips:

If you go somewhere and like a color you see, or you like a color already in your home, they make a tool that can scan the wall and pop up different options!

  1. The first look is just a typical repaint. Updating your kitchen with a fresh coat of paint can take your kitchen cave and turn it into an elegant hangout. Currently one of the most popular colors is a shade of grey.

2. Another way to give your kitchen its own personality is by having one of the detached sections an accent color while keeping the rest of the cabinets the same. It’s a way of having an accent without drawing too much attention away.

3. Another new up and coming look is accenting the island. Something about the center of the room being a darker color than the rest brings it all together. It gives the heart of the home its own heart.

4. Having the top a lighter color and the bottom a darker color. This nice accent separates the room in a nice clean line. It brings a sophisticated feel to the room. If you are feeling really rebellious, you can have the top cabinets the darker color.

Different finishes(Sheen): 

  • High Gloss: Most durable and reflects the most light. Will show any/all imperfections.
  • Semi-Gloss: Easy to wipe off and clean. Shiny but not as shiny as high-gloss. Will show major imperfections but not all.
  • Satin: Easy to clean doesn’t reflect a lot of light but doesn’t absorb the light.
  • Eggshell: Soft, velvety look. Resists stains but you may need to scrub a little. There is no shine to this finish.
  • Flat/Matte: There is no shine to this finish and it absorbs the light. Best for hiding imperfections in walls but is hard to clean, it may need painted over if it gets dirty enough.

What finish is best for where:

  • High Gloss: Best for high traffic areas (Cabinets, Trim, Doors) Not good for most walls.
  • Semi-gloss: Good for wet rooms (Kitchen, bathroom)
  • Satin: Good for family rooms, foyers, halls and children’s rooms.
  • Eggshell: Great for the dining room and living room.
  • Flat/Matte: Good for adults rooms and ceilings. Not recommended for children’s rooms or high traffic areas.

Painting Cabinets:

This is our exclusive process here at Exterior and Interior Painting Specialists, it only takes us THREE short days!

Our kitchen cabinet process used to take us 6 long days, but since we work in an assembly line process, use an airless sprayer, and create an onsite spray booth we are able to cut it down to a 3-day process!

Below we will take you step by step with the cabinets! There will also be helpful pictures and videos along the way! 

Before

Springfield

Morton

Laying Drop Cloths: DAY 1

The first thing we do when we enter a new job site is lay down drop cloths to protect your floors. In parts that we will be spraying or there may be heavy paint on the ground, we use a construction like paper. We make sure to tape down this paper to make sure it doesn’t move. As long as there are no holes or tears in the paper it is completely leak proof, so if a curious dog wonders into an area and there is a water bucket or open can, it won’t leak through to the floor! In other areas we use regular cloth drop clothes. These still protect the floor since they are thick and they are laid out through the entire area we will walk through to guarantee no tracks are left behind!

If we are at a big project site, we section it into groups and work through. We paint one area then move the drop clothes and paint a different area while it dries before the second coat. This is how we save time and only take three days instead of six!

Step Two: Removing Pieces

Next, we begin taking the drawer fronts and the door fronts off the units. These will not leave the job site at all. We will talk about where they will go but for now, we will set them off to the side. As you are removing the drawer fronts and the door fronts, put a piece of tape with a number on it inside the unit right where the door would be. This will help make sure the doors go in the same spot they were and the drawers do as well.  After we take everything down we also remove all the hardware, this includes the handles, hinges, and anything else on the cabinets. Make sure to set these all to the side. Use tape to keep the screws with the handles they belong too. Write the corresponding number that is on the unit and door/drawer front on the hinges and handles that go on it as well.

Step Three: Cleaning with TSP

After taking everything off the cabinet fronts we clean everything with TSP. We use TSP (Trisodium Phosphate) to break down the grease, grime, and all other things off the surface. It is a tough cleaner, so be careful and use gloves when using it, however it is safe for us to use on your cabinets. Make sure to get into the cracks, depending on the style of cabinets you have! If you don’t clean everything well the primer will not adhere right and the paint will not stick. Just like in domino’s, if one thing goes wrong, everything else tumbles down and does as well. 

Step Four: Taping

To be able to spray the units, and sand with less of a mess, we will tape off the inside of the units so there is no over spray. We do this in the drawer and door fronts as shown in the video below. We take plastic and drape it over all the appliances, so nothing is damaged with over spray. We also use tape and plastic to cover the sink and counter tops! We want the only thing showing to be what we are painting!

Step Five: HEPA Filter Sanding System!

Now, before we go onto a light sanding we are going to set up our HEPA filter sanding system! This is important to do before you start sanding everything! This filter system attaches to the sander and collects very small microns of dust! Sanding takes off any other layers of paint on the cabinets and makes it easier for the primer and new paint to adhere to the cabinets.

Step Six: Sanding

Now we need to sand everything. We will sand the doors and drawer fronts that we removed everything from before, and we will sand the actual units that are attached in the kitchen, living room, bathroom, or wherever the cabinets are. Make sure you really get into the corners and the cracks, but don’t sand too deep, you just want to remove and paint, finish, or sealers that were there before.

Click here for help deciding if you need to replace or repaint your exterior!

Step Seven: Light clean again

After  lightly sanding everything (Door fronts, drawer fronts, & units) we then clean them with TSP again. This will just make sure to get any extra grease or grime that may still be on there.

Step Eight: Spray Booth!

We are going to go on and set up a spray booth! Building a spray booth in the garage, spare room, or basement allows us to spray the fronts with the airless sprayer and keeping it on site! It is important to keep them on site for many reasons! If we take them off site we risk them being damaged or lost! Keeping them onsite also means we have to move them the least, keeping their environment stable will make sure it looks its best as well as helping it dry faster!

To set up the spray booth we first lay drop cloths to protect the floor, we then hang plastic from the ceiling creating an enclosed space so there is no over spray. This means we can easily get every angle of whatever we are painting in the booth, without worrying about damaging anything else.

We spray the cabinets instead of roll or brush so there will not be any marks. It is important to keep up on your airless sprayer. If you do not, there can be many issues including over spraying and runs in the paint. 

Step Nine: Setting up the airless sprayer

We use an airless sprayer that goes up to 3,000 psi. You must  ALWAYS keep clean tips in an airless sprayer; this will help prevent any  over-spray and keep a constant amount of paint flowing out. If you do not change the tips often, old paint will get mixed in with the new paint and there will be issues with running, globs of dried paint will also be mixed in and will ruin your new paint if you do not keep it maintained.

Step Ten: Spraying Primer

Now it is time to do the first spray: The primer. We use Extreme Bond primer from Sherwin-Williams. It needs to be applied very thinly. You want it to basically be translucent. 

We must wait at least 4 hours before we can apply the first coat of paint. Letting the primer set in will help the paint adhere the best.

This is a great time to work on any other projects also going on in the home!

Step Eleven: First coat of paint

We then paint the first coat. The first coat doesn’t need to be very thick since we always paint two coats.  It is necessary to let it sit for at least four hour before painting the second coat, we will let it sit and dry over night.

End of Day One

Step Twelve: Second Coat / DAY 2

At the beginning of the second day we check to make sure the first coat is set and everything looks good. After applying the second coat of paint you will need to wait another at least eight hours before you can do anything. At our company we always do two coats on all of our projects.

After the second coat is painted on waiting 12 hours is a must before it will be durable enough to put everything back together. We always let them sit over night.

We take this time to work on any other projects going on in the home! 

End of Day Two

Step Thirteen: Checking / DAY 3

On this third day we will make sure everything looks good, no runs or uneven spots. 

Once we have done this and made sure everything is dry, we can begin cleaning and putting things back.

Step Fourteen: Removing Tape & Reapplying

Now we can go and start removing the blue tape we had used to closed off the inside of the cabinet units where the doors and drawers would go. After removing all of the tape from the inside of the units you can hang the doors and drawers back up where they go. Make sure they match the numbers you put on the tape and that they are all aligned and equal. 

Step Fifteen: Clean Up

Now that everything has been put back together and approved by the job lead, we will take the rest of the plastic off the counter tops and appliances, and we will pick up the drop cloths throughout the house and take the spray booth apart.

We always make sure to walk the whole area we were working in to amek sure there are no messes we made.

After

Springfield

Morton

What we use:

Our cabinet painting process used to take us six days to complete one project, but after practicing over the last four years and working with Sherwin-Williams representatives, we were able to cut that time in half per project. You can click here to read all about our cabinet painting process here at Exterior and Interior Painting Specialists. The process is the same for all cabinets, whether they are in a garage, bathroom, kitchen or even laundry room. We use the same product on all cabinets, trim & doors. 

Emerald Urethane Enamel:

Product Information: 

  • A smooth and luxurious finish for doors and trim. Delivers a finish that withstands wear and tear and goes on in fewer coats.
  • Durable finish is great for windows, doors and trim.
  • Perfect for areas that are cleaned frequently.
  • Interior/exterior waterbased urethane modified alkyd with the look and feel of an alkyd/oil finish.
  • Available in a range of Sherwin-Williams colors and custom tints in satin, semi-gloss and gloss sheens. Resists yellowing compared to traditional oil based paints and has excellent blocking resistance, allowing surfaces to maintain a tough, durable finish.

We use Emerald Urethane Enamel for many projects, as mentioned above. We use it for these things because it is so durable and lasts a long time. It’s great for areas that are touched a lot. 

Low-budget kitchen tips:

Swap Out the Faucet

A new fixture can add that extra shine you’re looking for. New faucets have a lot more functionality, so the upgrade can be more than just aesthetic. This is a good first-time DIY plumbing project to try. Just make sure you shut off the water valves and follow the directions carefully.

Tin-Tile Backsplash

This is an easy project that should cost you no more than $100. Tin tile has many advantages: Its reflective properties will brighten a room, it is easy to clean and it comes in a variety of finishes to match your kitchen’s hardware and fixtures.

Try a Peel-and-Stick Backsplash Kit

An all-in-one mosaic tile kit is a snap to install and comes with everything you need, including the tools. The tile is peel-and-stick and the grout is pre-mixed so you save time, mess and money.

Hang ’em High

Pots and pans take up a lot of cabinet space. Hanging cookware on a rack suspended from the ceiling will free up a cabinet or two, and it will add more style to your kitchen.

Conclusion:

Thank you for reading Exterior and Interior Painting Specialists blog! Today we went over some simple tips and tricks to help you spruce up your home on a budget! We  helped you pick out colors and finishes, as well as sharing our entire cabinet painting process! If you are doing the cabinets yourself and don’t have an airless sprayer to use, you can still use our entire process by brushing or rolling! Check out our table of contents below to see everything we go over! Call or text us at 309-349-7021 for a free estimate!

For a estimate, please fill out the form below

Skylar at 309-349-7021

😍Color help & kitchen ideas!😍

Introduction:

Hello, welcome to Exterior and Interior Painting Specialists blog! Today we are going to go over some simple tips and tricks to help you spruce up your home on a budget! We are going to help you pick out colors and finishes, as well as sharing our entire cabinet painting process! If you are doing the cabinets yourself and don’t have an airless sprayer to use, you can still use our entire process by brushing or rolling! Check out our table of contents below to see everything we go over! Call or text us at 309-349-7021 for a free estimate!

Table of contents:

  • Helping choosing colors and finishes
  • Different kitchen styles
  • Our cabinet painting process
  • What we use
  • Low-budget kitchen tips!
  • Conclusion

Sherwin-Williams has an app that you can download!

Use ColorSnap® Visualizer for WebMobile, or iPad to capture colors from your surrounding and match them to Sherwin-Williams paint colors. Explore over 1,500 colors to get inspiration from a photo.  Virtually paint your rooms with ColorSnap® Visualizer for Web and iPad.

The app allows you to browse their color selection and save your favorites! To make it even better, you can take a picture of whatever you’re painting (Cabinets, Walls, Furniture, etc.) and drag the color you want to see up there to picture it before actually dedicating to the color!

Keep this app in mind as you read through our helpful tips!

15 Helpful tips:

1) Choose a Color Scheme From the Largest Pattern in the Space:

Look around the room you are painting- if there are any large patterns, colorful rugs or large pieces of art; choose the color that stands out the most that you like.
For a neutral wall paint color, look to the pattern’s whites and beiges. You can choose any color you like out of this. Of course if you are starting fresh you can choose whatever color and then buy your furniture to match the color you chose.

2) Decorate From Dark to Light, Vertically

Use darker colors for the floor, medium colors for the walls and light for the ceiling. This will help keep the room looking nice and aligned.

3) Start With the Formal Areas of the House:

Specifically, the living room, dining room, and entryway.
Choose a color scheme for those areas first, then pull one color from the scheme.
For example, take the red sofa and tone it down (say, to burgundy) for an accent in more private spaces such as the den, office or bedroom.

4) Use the Color Wheel:

In general colors next to each other on the color wheel, such as blue and green — are more casual and relaxing, and work best in informal or private spaces. This is a good strategy for a bedroom, where you want to rest and recover.

5) Use Your Clothes:

Most people buy clothes in colors they like to wear and they look good in. Similarly, you should dress your rooms in colors that flatter you. If denim is your go-to, consider a navy sofa or if you look (and feel) perkiest in bright yellows, try mixing in a few citrusy accents with pillows or accessories throughtout the room.

6) Back to Black:

For a small pop, try a black lampshade or a black vase; for bigger impact, paint your kitchen’s base cabinets in the high-drama hue. This will stand out from everything else, but in a classic way.

7) Go With Grays:

Put today’s trendiest and neutral gray to work in any style interior. Gray’s chameleon-like quality allows the color to appear there truest. Grey is extremely popular right now! Any and all shades you can think of!

8) Use the Rule of 60-30-10:

“When decorating a space, divide the colors into components of 60 percent of a dominant color (walls), 30 percent of a secondary color (upholstery) and 10 percent of an accent color (accessories)

9) Make Small Spaces Pop:

If you have a small room in your house, don’t paint it white to make it seem bigger. Instead, give it more oomph with a look-at-me color choice. Let your big rooms expand with light, and your small rooms envelop you.

10) Contrast Warm and Cool:

With a healthy balance of 80-20% you can accent a room giving it life without over stimulating. Now this isn’t necessarily 80 % warm and 20 % cool or vise versa, however, it is either or. Make sure to not have too much of both, it will make the room over whelming and feel crowded. 
 

11) Rock a Monochromatic Look

Shine the spotlight on your favorite color by filling a small space, like a bathroom, with just that hue.

12) Follow the Rule of Three:

Limiting your palette to just three colors is a can’t-miss strategy in any space. Following this rule will ensure you don’t have too much going on in one room.
 

13) Elegant look:

Neutral colors offer elegance and flexibility within a room. Neutral colors are no longer simply white or beige. You can turn a simple living room into one of elegance by selecting varying shades of neutral colors such as almond walls with red toned browns on the trim. You can also add splashes of color throughout the room with a color throw, pillow or vase carefully placed to offset the subtle neutral tones in the room.

14)  Vibrant look:

If you want a room with pizzazz, choose vibrant colors and their respective shades such as oranges and gold, reds and dark purples. You can complement these colors by selecting a two next to each other such as gold and orange and one from the opposite side of the color wheel such as purple. You can also select black and red for a real stand out contrast and look that is reminiscent of an Oriental look. Choose two colors next to each other on the color wheel for a visual contrast as one will stand out from the other.
You can lower a high ceiling visually by painting it a darker shade than the walls. By the same token, you can expand a room by selecting a lighter color for your ceiling than the walls. Don’t be afraid to add a tint of color to your ceiling paint for a tied in and subtle look. One way to go if you are afraid of too much color in your ceiling is to paint the ceiling, door trim and floor moldings the same shade such as a creamy ivory. This will add a touch of elegance and a nice transition throughout your room.

Bonus Tips:

If you go somewhere and like a color you see, or you like a color already in your home, they make a tool that can scan the wall and pop up different options!

  1. The first look is just a typical repaint. Updating your kitchen with a fresh coat of paint can take your kitchen cave and turn it into an elegant hangout. Currently one of the most popular colors is a shade of grey.

2. Another way to give your kitchen its own personality is by having one of the detached sections an accent color while keeping the rest of the cabinets the same. It’s a way of having an accent without drawing too much attention away.

3. Another new up and coming look is accenting the island. Something about the center of the room being a darker color than the rest brings it all together. It gives the heart of the home its own heart.

4. Having the top a lighter color and the bottom a darker color. This nice accent separates the room in a nice clean line. It brings a sophisticated feel to the room. If you are feeling really rebellious, you can have the top cabinets the darker color.

Different finishes(Sheen): 

  • High Gloss: Most durable and reflects the most light. Will show any/all imperfections.
  • Semi-Gloss: Easy to wipe off and clean. Shiny but not as shiny as high-gloss. Will show major imperfections but not all.
  • Satin: Easy to clean doesn’t reflect a lot of light but doesn’t absorb the light.
  • Eggshell: Soft, velvety look. Resists stains but you may need to scrub a little. There is no shine to this finish.
  • Flat/Matte: There is no shine to this finish and it absorbs the light. Best for hiding imperfections in walls but is hard to clean, it may need painted over if it gets dirty enough.

What finish is best for where:

  • High Gloss: Best for high traffic areas (Cabinets, Trim, Doors) Not good for most walls.
  • Semi-gloss: Good for wet rooms (Kitchen, bathroom)
  • Satin: Good for family rooms, foyers, halls and children’s rooms.
  • Eggshell: Great for the dining room and living room.
  • Flat/Matte: Good for adults rooms and ceilings. Not recommended for children’s rooms or high traffic areas.

Painting Cabinets:

This is our exclusive process here at Exterior and Interior Painting Specialists, it only takes us THREE short days!

Our kitchen cabinet process used to take us 6 long days, but since we work in an assembly line process, use an airless sprayer, and create an onsite spray booth we are able to cut it down to a 3-day process!

Below we will take you step by step with the cabinets! There will also be helpful pictures and videos along the way! 

Before

Springfield

Morton

Laying Drop Cloths: DAY 1

The first thing we do when we enter a new job site is lay down drop cloths to protect your floors. In parts that we will be spraying or there may be heavy paint on the ground, we use a construction like paper. We make sure to tape down this paper to make sure it doesn’t move. As long as there are no holes or tears in the paper it is completely leak proof, so if a curious dog wonders into an area and there is a water bucket or open can, it won’t leak through to the floor! In other areas we use regular cloth drop clothes. These still protect the floor since they are thick and they are laid out through the entire area we will walk through to guarantee no tracks are left behind!

If we are at a big project site, we section it into groups and work through. We paint one area then move the drop clothes and paint a different area while it dries before the second coat. This is how we save time and only take three days instead of six!

Step Two: Removing Pieces

Next, we begin taking the drawer fronts and the door fronts off the units. These will not leave the job site at all. We will talk about where they will go but for now, we will set them off to the side. As you are removing the drawer fronts and the door fronts, put a piece of tape with a number on it inside the unit right where the door would be. This will help make sure the doors go in the same spot they were and the drawers do as well.  After we take everything down we also remove all the hardware, this includes the handles, hinges, and anything else on the cabinets. Make sure to set these all to the side. Use tape to keep the screws with the handles they belong too. Write the corresponding number that is on the unit and door/drawer front on the hinges and handles that go on it as well.

Step Three: Cleaning with TSP

After taking everything off the cabinet fronts we clean everything with TSP. We use TSP (Trisodium Phosphate) to break down the grease, grime, and all other things off the surface. It is a tough cleaner, so be careful and use gloves when using it, however it is safe for us to use on your cabinets. Make sure to get into the cracks, depending on the style of cabinets you have! If you don’t clean everything well the primer will not adhere right and the paint will not stick. Just like in domino’s, if one thing goes wrong, everything else tumbles down and does as well. 

Step Four: Taping

To be able to spray the units, and sand with less of a mess, we will tape off the inside of the units so there is no over spray. We do this in the drawer and door fronts as shown in the video below. We take plastic and drape it over all the appliances, so nothing is damaged with over spray. We also use tape and plastic to cover the sink and counter tops! We want the only thing showing to be what we are painting!

Step Five: HEPA Filter Sanding System!

Now, before we go onto a light sanding we are going to set up our HEPA filter sanding system! This is important to do before you start sanding everything! This filter system attaches to the sander and collects very small microns of dust! Sanding takes off any other layers of paint on the cabinets and makes it easier for the primer and new paint to adhere to the cabinets.

Step Six: Sanding

Now we need to sand everything. We will sand the doors and drawer fronts that we removed everything from before, and we will sand the actual units that are attached in the kitchen, living room, bathroom, or wherever the cabinets are. Make sure you really get into the corners and the cracks, but don’t sand too deep, you just want to remove and paint, finish, or sealers that were there before.

Click here for help deciding if you need to replace or repaint your exterior!

Step Seven: Light clean again

After  lightly sanding everything (Door fronts, drawer fronts, & units) we then clean them with TSP again. This will just make sure to get any extra grease or grime that may still be on there.

Step Eight: Spray Booth!

We are going to go on and set up a spray booth! Building a spray booth in the garage, spare room, or basement allows us to spray the fronts with the airless sprayer and keeping it on site! It is important to keep them on site for many reasons! If we take them off site we risk them being damaged or lost! Keeping them onsite also means we have to move them the least, keeping their environment stable will make sure it looks its best as well as helping it dry faster!

To set up the spray booth we first lay drop cloths to protect the floor, we then hang plastic from the ceiling creating an enclosed space so there is no over spray. This means we can easily get every angle of whatever we are painting in the booth, without worrying about damaging anything else.

We spray the cabinets instead of roll or brush so there will not be any marks. It is important to keep up on your airless sprayer. If you do not, there can be many issues including over spraying and runs in the paint. 

Step Nine: Setting up the airless sprayer

We use an airless sprayer that goes up to 3,000 psi. You must  ALWAYS keep clean tips in an airless sprayer; this will help prevent any  over-spray and keep a constant amount of paint flowing out. If you do not change the tips often, old paint will get mixed in with the new paint and there will be issues with running, globs of dried paint will also be mixed in and will ruin your new paint if you do not keep it maintained.

Step Ten: Spraying Primer

Now it is time to do the first spray: The primer. We use Extreme Bond primer from Sherwin-Williams. It needs to be applied very thinly. You want it to basically be translucent. 

We must wait at least 4 hours before we can apply the first coat of paint. Letting the primer set in will help the paint adhere the best.

This is a great time to work on any other projects also going on in the home!

Step Eleven: First coat of paint

We then paint the first coat. The first coat doesn’t need to be very thick since we always paint two coats.  It is necessary to let it sit for at least four hour before painting the second coat, we will let it sit and dry over night.

End of Day One

Step Twelve: Second Coat / DAY 2

At the beginning of the second day we check to make sure the first coat is set and everything looks good. After applying the second coat of paint you will need to wait another at least eight hours before you can do anything. At our company we always do two coats on all of our projects.

After the second coat is painted on waiting 12 hours is a must before it will be durable enough to put everything back together. We always let them sit over night.

We take this time to work on any other projects going on in the home! 

End of Day Two

Step Thirteen: Checking / DAY 3

On this third day we will make sure everything looks good, no runs or uneven spots. 

Once we have done this and made sure everything is dry, we can begin cleaning and putting things back.

Step Fourteen: Removing Tape & Reapplying

Now we can go and start removing the blue tape we had used to closed off the inside of the cabinet units where the doors and drawers would go. After removing all of the tape from the inside of the units you can hang the doors and drawers back up where they go. Make sure they match the numbers you put on the tape and that they are all aligned and equal. 

Step Fifteen: Clean Up

Now that everything has been put back together and approved by the job lead, we will take the rest of the plastic off the counter tops and appliances, and we will pick up the drop cloths throughout the house and take the spray booth apart.

We always make sure to walk the whole area we were working in to amek sure there are no messes we made.

After

Springfield

Morton

What we use:

Our cabinet painting process used to take us six days to complete one project, but after practicing over the last four years and working with Sherwin-Williams representatives, we were able to cut that time in half per project. You can click here to read all about our cabinet painting process here at Exterior and Interior Painting Specialists. The process is the same for all cabinets, whether they are in a garage, bathroom, kitchen or even laundry room. We use the same product on all cabinets, trim & doors. 

Emerald Urethane Enamel:

Product Information: 

  • A smooth and luxurious finish for doors and trim. Delivers a finish that withstands wear and tear and goes on in fewer coats.
  • Durable finish is great for windows, doors and trim.
  • Perfect for areas that are cleaned frequently.
  • Interior/exterior waterbased urethane modified alkyd with the look and feel of an alkyd/oil finish.
  • Available in a range of Sherwin-Williams colors and custom tints in satin, semi-gloss and gloss sheens. Resists yellowing compared to traditional oil based paints and has excellent blocking resistance, allowing surfaces to maintain a tough, durable finish.

We use Emerald Urethane Enamel for many projects, as mentioned above. We use it for these things because it is so durable and lasts a long time. It’s great for areas that are touched a lot. 

Low-budget kitchen tips:

Swap Out the Faucet

A new fixture can add that extra shine you’re looking for. New faucets have a lot more functionality, so the upgrade can be more than just aesthetic. This is a good first-time DIY plumbing project to try. Just make sure you shut off the water valves and follow the directions carefully.

Tin-Tile Backsplash

This is an easy project that should cost you no more than $100. Tin tile has many advantages: Its reflective properties will brighten a room, it is easy to clean and it comes in a variety of finishes to match your kitchen’s hardware and fixtures.

Try a Peel-and-Stick Backsplash Kit

An all-in-one mosaic tile kit is a snap to install and comes with everything you need, including the tools. The tile is peel-and-stick and the grout is pre-mixed so you save time, mess and money.

Hang ’em High

Pots and pans take up a lot of cabinet space. Hanging cookware on a rack suspended from the ceiling will free up a cabinet or two, and it will add more style to your kitchen.

Conclusion:

Thank you for reading Exterior and Interior Painting Specialists blog! Today we went over some simple tips and tricks to help you spruce up your home on a budget! We  helped you pick out colors and finishes, as well as sharing our entire cabinet painting process! If you are doing the cabinets yourself and don’t have an airless sprayer to use, you can still use our entire process by brushing or rolling! Check out our table of contents below to see everything we go over! Call or text us at 309-349-7021 for a free estimate!

For a estimate, please fill out the form below

Skylar at 309-349-7021

😍DIY kitchen updates & color help!😍

Introduction:

Hello, welcome to Exterior and Interior Painting Specialists blog! Today we are going to go over some simple tips and tricks to help you spruce up your home on a budget! We are going to help you pick out colors and finishes, as well as sharing our entire cabinet painting process! If you are doing the cabinets yourself and don’t have an airless sprayer to use, you can still use our entire process by brushing or rolling! Check out our table of contents below to see everything we go over! Call or text us at 309-349-7021 for a free estimate!

Table of contents:

  • Helping choosing colors and finishes
  • Different kitchen styles
  • Our cabinet painting process
  • What we use
  • Low-budget kitchen tips!
  • Conclusion

Sherwin-Williams has an app that you can download!

Use ColorSnap® Visualizer for WebMobile, or iPad to capture colors from your surrounding and match them to Sherwin-Williams paint colors. Explore over 1,500 colors to get inspiration from a photo.  Virtually paint your rooms with ColorSnap® Visualizer for Web and iPad.

The app allows you to browse their color selection and save your favorites! To make it even better, you can take a picture of whatever you’re painting (Cabinets, Walls, Furniture, etc.) and drag the color you want to see up there to picture it before actually dedicating to the color!

Keep this app in mind as you read through our helpful tips!

15 Helpful tips:

1) Choose a Color Scheme From the Largest Pattern in the Space:

Look around the room you are painting- if there are any large patterns, colorful rugs or large pieces of art; choose the color that stands out the most that you like.
For a neutral wall paint color, look to the pattern’s whites and beiges. You can choose any color you like out of this. Of course if you are starting fresh you can choose whatever color and then buy your furniture to match the color you chose.

2) Decorate From Dark to Light, Vertically

Use darker colors for the floor, medium colors for the walls and light for the ceiling. This will help keep the room looking nice and aligned.

3) Start With the Formal Areas of the House:

Specifically, the living room, dining room, and entryway.
Choose a color scheme for those areas first, then pull one color from the scheme.
For example, take the red sofa and tone it down (say, to burgundy) for an accent in more private spaces such as the den, office or bedroom.

4) Use the Color Wheel:

In general colors next to each other on the color wheel, such as blue and green — are more casual and relaxing, and work best in informal or private spaces. This is a good strategy for a bedroom, where you want to rest and recover.

5) Use Your Clothes:

Most people buy clothes in colors they like to wear and they look good in. Similarly, you should dress your rooms in colors that flatter you. If denim is your go-to, consider a navy sofa or if you look (and feel) perkiest in bright yellows, try mixing in a few citrusy accents with pillows or accessories throughtout the room.

6) Back to Black:

For a small pop, try a black lampshade or a black vase; for bigger impact, paint your kitchen’s base cabinets in the high-drama hue. This will stand out from everything else, but in a classic way.

7) Go With Grays:

Put today’s trendiest and neutral gray to work in any style interior. Gray’s chameleon-like quality allows the color to appear there truest. Grey is extremely popular right now! Any and all shades you can think of!

8) Use the Rule of 60-30-10:

“When decorating a space, divide the colors into components of 60 percent of a dominant color (walls), 30 percent of a secondary color (upholstery) and 10 percent of an accent color (accessories)

9) Make Small Spaces Pop:

If you have a small room in your house, don’t paint it white to make it seem bigger. Instead, give it more oomph with a look-at-me color choice. Let your big rooms expand with light, and your small rooms envelop you.

10) Contrast Warm and Cool:

With a healthy balance of 80-20% you can accent a room giving it life without over stimulating. Now this isn’t necessarily 80 % warm and 20 % cool or vise versa, however, it is either or. Make sure to not have too much of both, it will make the room over whelming and feel crowded. 
 

11) Rock a Monochromatic Look

Shine the spotlight on your favorite color by filling a small space, like a bathroom, with just that hue.

12) Follow the Rule of Three:

Limiting your palette to just three colors is a can’t-miss strategy in any space. Following this rule will ensure you don’t have too much going on in one room.
 

13) Elegant look:

Neutral colors offer elegance and flexibility within a room. Neutral colors are no longer simply white or beige. You can turn a simple living room into one of elegance by selecting varying shades of neutral colors such as almond walls with red toned browns on the trim. You can also add splashes of color throughout the room with a color throw, pillow or vase carefully placed to offset the subtle neutral tones in the room.

14)  Vibrant look:

If you want a room with pizzazz, choose vibrant colors and their respective shades such as oranges and gold, reds and dark purples. You can complement these colors by selecting a two next to each other such as gold and orange and one from the opposite side of the color wheel such as purple. You can also select black and red for a real stand out contrast and look that is reminiscent of an Oriental look. Choose two colors next to each other on the color wheel for a visual contrast as one will stand out from the other.
You can lower a high ceiling visually by painting it a darker shade than the walls. By the same token, you can expand a room by selecting a lighter color for your ceiling than the walls. Don’t be afraid to add a tint of color to your ceiling paint for a tied in and subtle look. One way to go if you are afraid of too much color in your ceiling is to paint the ceiling, door trim and floor moldings the same shade such as a creamy ivory. This will add a touch of elegance and a nice transition throughout your room.

Bonus Tips:

If you go somewhere and like a color you see, or you like a color already in your home, they make a tool that can scan the wall and pop up different options!

  1. The first look is just a typical repaint. Updating your kitchen with a fresh coat of paint can take your kitchen cave and turn it into an elegant hangout. Currently one of the most popular colors is a shade of grey.

2. Another way to give your kitchen its own personality is by having one of the detached sections an accent color while keeping the rest of the cabinets the same. It’s a way of having an accent without drawing too much attention away.

3. Another new up and coming look is accenting the island. Something about the center of the room being a darker color than the rest brings it all together. It gives the heart of the home its own heart.

4. Having the top a lighter color and the bottom a darker color. This nice accent separates the room in a nice clean line. It brings a sophisticated feel to the room. If you are feeling really rebellious, you can have the top cabinets the darker color.

Different finishes(Sheen): 

  • High Gloss: Most durable and reflects the most light. Will show any/all imperfections.
  • Semi-Gloss: Easy to wipe off and clean. Shiny but not as shiny as high-gloss. Will show major imperfections but not all.
  • Satin: Easy to clean doesn’t reflect a lot of light but doesn’t absorb the light.
  • Eggshell: Soft, velvety look. Resists stains but you may need to scrub a little. There is no shine to this finish.
  • Flat/Matte: There is no shine to this finish and it absorbs the light. Best for hiding imperfections in walls but is hard to clean, it may need painted over if it gets dirty enough.

What finish is best for where:

  • High Gloss: Best for high traffic areas (Cabinets, Trim, Doors) Not good for most walls.
  • Semi-gloss: Good for wet rooms (Kitchen, bathroom)
  • Satin: Good for family rooms, foyers, halls and children’s rooms.
  • Eggshell: Great for the dining room and living room.
  • Flat/Matte: Good for adults rooms and ceilings. Not recommended for children’s rooms or high traffic areas.

Painting Cabinets:

This is our exclusive process here at Exterior and Interior Painting Specialists, it only takes us THREE short days!

Our kitchen cabinet process used to take us 6 long days, but since we work in an assembly line process, use an airless sprayer, and create an onsite spray booth we are able to cut it down to a 3-day process!

Below we will take you step by step with the cabinets! There will also be helpful pictures and videos along the way! 

Before

Springfield

Morton

Laying Drop Cloths: DAY 1

The first thing we do when we enter a new job site is lay down drop cloths to protect your floors. In parts that we will be spraying or there may be heavy paint on the ground, we use a construction like paper. We make sure to tape down this paper to make sure it doesn’t move. As long as there are no holes or tears in the paper it is completely leak proof, so if a curious dog wonders into an area and there is a water bucket or open can, it won’t leak through to the floor! In other areas we use regular cloth drop clothes. These still protect the floor since they are thick and they are laid out through the entire area we will walk through to guarantee no tracks are left behind!

If we are at a big project site, we section it into groups and work through. We paint one area then move the drop clothes and paint a different area while it dries before the second coat. This is how we save time and only take three days instead of six!

Step Two: Removing Pieces

Next, we begin taking the drawer fronts and the door fronts off the units. These will not leave the job site at all. We will talk about where they will go but for now, we will set them off to the side. As you are removing the drawer fronts and the door fronts, put a piece of tape with a number on it inside the unit right where the door would be. This will help make sure the doors go in the same spot they were and the drawers do as well.  After we take everything down we also remove all the hardware, this includes the handles, hinges, and anything else on the cabinets. Make sure to set these all to the side. Use tape to keep the screws with the handles they belong too. Write the corresponding number that is on the unit and door/drawer front on the hinges and handles that go on it as well.

Step Three: Cleaning with TSP

After taking everything off the cabinet fronts we clean everything with TSP. We use TSP (Trisodium Phosphate) to break down the grease, grime, and all other things off the surface. It is a tough cleaner, so be careful and use gloves when using it, however it is safe for us to use on your cabinets. Make sure to get into the cracks, depending on the style of cabinets you have! If you don’t clean everything well the primer will not adhere right and the paint will not stick. Just like in domino’s, if one thing goes wrong, everything else tumbles down and does as well. 

Step Four: Taping

To be able to spray the units, and sand with less of a mess, we will tape off the inside of the units so there is no over spray. We do this in the drawer and door fronts as shown in the video below. We take plastic and drape it over all the appliances, so nothing is damaged with over spray. We also use tape and plastic to cover the sink and counter tops! We want the only thing showing to be what we are painting!

Step Five: HEPA Filter Sanding System!

Now, before we go onto a light sanding we are going to set up our HEPA filter sanding system! This is important to do before you start sanding everything! This filter system attaches to the sander and collects very small microns of dust! Sanding takes off any other layers of paint on the cabinets and makes it easier for the primer and new paint to adhere to the cabinets.

Step Six: Sanding

Now we need to sand everything. We will sand the doors and drawer fronts that we removed everything from before, and we will sand the actual units that are attached in the kitchen, living room, bathroom, or wherever the cabinets are. Make sure you really get into the corners and the cracks, but don’t sand too deep, you just want to remove and paint, finish, or sealers that were there before.

Click here for help deciding if you need to replace or repaint your exterior!

Step Seven: Light clean again

After  lightly sanding everything (Door fronts, drawer fronts, & units) we then clean them with TSP again. This will just make sure to get any extra grease or grime that may still be on there.

Step Eight: Spray Booth!

We are going to go on and set up a spray booth! Building a spray booth in the garage, spare room, or basement allows us to spray the fronts with the airless sprayer and keeping it on site! It is important to keep them on site for many reasons! If we take them off site we risk them being damaged or lost! Keeping them onsite also means we have to move them the least, keeping their environment stable will make sure it looks its best as well as helping it dry faster!

To set up the spray booth we first lay drop cloths to protect the floor, we then hang plastic from the ceiling creating an enclosed space so there is no over spray. This means we can easily get every angle of whatever we are painting in the booth, without worrying about damaging anything else.

We spray the cabinets instead of roll or brush so there will not be any marks. It is important to keep up on your airless sprayer. If you do not, there can be many issues including over spraying and runs in the paint. 

Step Nine: Setting up the airless sprayer

We use an airless sprayer that goes up to 3,000 psi. You must  ALWAYS keep clean tips in an airless sprayer; this will help prevent any  over-spray and keep a constant amount of paint flowing out. If you do not change the tips often, old paint will get mixed in with the new paint and there will be issues with running, globs of dried paint will also be mixed in and will ruin your new paint if you do not keep it maintained.

Step Ten: Spraying Primer

Now it is time to do the first spray: The primer. We use Extreme Bond primer from Sherwin-Williams. It needs to be applied very thinly. You want it to basically be translucent. 

We must wait at least 4 hours before we can apply the first coat of paint. Letting the primer set in will help the paint adhere the best.

This is a great time to work on any other projects also going on in the home!

Step Eleven: First coat of paint

We then paint the first coat. The first coat doesn’t need to be very thick since we always paint two coats.  It is necessary to let it sit for at least four hour before painting the second coat, we will let it sit and dry over night.

End of Day One

Step Twelve: Second Coat / DAY 2

At the beginning of the second day we check to make sure the first coat is set and everything looks good. After applying the second coat of paint you will need to wait another at least eight hours before you can do anything. At our company we always do two coats on all of our projects.

After the second coat is painted on waiting 12 hours is a must before it will be durable enough to put everything back together. We always let them sit over night.

We take this time to work on any other projects going on in the home! 

End of Day Two

Step Thirteen: Checking / DAY 3

On this third day we will make sure everything looks good, no runs or uneven spots. 

Once we have done this and made sure everything is dry, we can begin cleaning and putting things back.

Step Fourteen: Removing Tape & Reapplying

Now we can go and start removing the blue tape we had used to closed off the inside of the cabinet units where the doors and drawers would go. After removing all of the tape from the inside of the units you can hang the doors and drawers back up where they go. Make sure they match the numbers you put on the tape and that they are all aligned and equal. 

Step Fifteen: Clean Up

Now that everything has been put back together and approved by the job lead, we will take the rest of the plastic off the counter tops and appliances, and we will pick up the drop cloths throughout the house and take the spray booth apart.

We always make sure to walk the whole area we were working in to amek sure there are no messes we made.